Monza–Trezzo–Bergamo Tramway
| Monza–Trezzo–Bergamo tramway | |
|---|---|
![]() Capriate, tram station | |
| Overview | |
| Locale | Lombardy, Italy |
| Termini | |
| Service | |
| Type | Interurban tram |
| Operator | MTB (1890–1939) ATM (1939–1958) |
| History | |
| Opened | 1 July 1890 |
| Closed | 1953 (Trezzo–Bergamo) 1958 (Monza–Trezzo) |
| Technical | |
| Track gauge | 1,445 mm (4 ft 8+7⁄8 in) |
The Monza–Trezzo–Bergamo tramway was an interurban tram line that connected Monza to Bergamo between 1890 and 1958.
After the closure of the Milan–Vittuone tramway, it was the last steam-powered interurban tramway in operation in Lombardy, as well as the last in Italy to employ accumulator trams.[1][2]
History

Following the opening of the Milan–Monza tramway in 1877, and of other mechanically powered interurban tram lines in the province of Milan, such as the Milan–Saronno–Tradate and the Milan–Vaprio tramway, several proposals were put forward for the construction of a line between Monza and Bergamo. All projects were, however, conditional on the construction of a bridge over the Adda at Trezzo, which was completed in the second half of the 1880s.[3][4] Consequently, it was only on 11 November 1888 that the Società Anonima per la Tranvia Monza-Trezzo-Bergamo (MTB) was established; on 15 March of the following year, it submitted an application to both provincial administrations concerned (Bergamo and Milan) to build and operate the eponymous tramway.[3][4]
The concession application was approved on 10 December 1889. It was to last for fifty years, expiring on 1 July 1939, and was renewable annually thereafter.[4]
The tramway was opened on 1 July 1890.[3][4] Among its peculiarities: the terminus at Monza was located inside the railway station yard of Monza, between the line to Chiasso and the one to Lecco, while a part of the track between Concorezzo and Vimercate ran alongside the Milan–Vimercate Tramway, operated by the Tramways a Vapore Interprovinciali di Milano, Bergamo e Cremona (TIP). Only an agreement between the two companies in 1903 allowed the installation of a connecting track at Vimercate for the sole purpose of enabling cumulative freight transport.[5]

In order to face competition from the electric tramways of the STEL and from road transport, in 1925 the MTB submitted to the Government a project for the electrification of the Monza–Trezzo section, including some route corrections. However, the authorities requested that the study be extended to the entire line, so a more ambitious project was resubmitted, which contemplated the possibility of cumulative freight transport with the state railways, exploiting the favourable position of the Monza terminus. Both the Government and the local authorities rejected the proposal, considering it too costly.[6]
On 1 July 1939, ATM took over the operation of the line, which the city of Milan had purchased from MTB in the preceding months.[7]
On 28 July 1952, service on the Trezzo bridge was suspended, as the iron structure built in the 1880s was to be replaced by a more modern concrete structure. This was the first step in the line's closure: on 31 January of the following year, service between Capriate and Bergamo was suppressed, as in the last few months operation had been exclusively steam-powered, since the battery charging stations for the railcars were located at Trezzo and Monza. Service on the remaining section was suppressed on 28 June 1958, replaced by bus services the following day.[1][8]
Characteristics
The line was an interurban tramway with a single track of 1,445 mm (4 ft 8+7⁄8 in) standard gauge. Its length was 37.206 km (23.119 mi). As for the track, Vignoles rails were used with different weights per linear metre for the various sections: the range went from 22 kg/m (44 lb/yd) to 30 kg/m (60 lb/yd).[9]
Route
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||

The original terminus was initially located in via Enrico da Monza, but in 1892 it was moved to the yard of Monza railway station.[3] The tramway left the yard and ran on its own right-of-way alongside via Azzone Visconti. After crossing the iron bridge over the Lambretto spillway canal, the tramway passed by the rolling stock depot in via Grassi and then continued on its own right-of-way next to the railway line for Lecco (and from 1912 also the line for Molteno) until the junction with via Bergamo. At this point, the tramway passed under a private house and then entered via Canova, which it would run along in mixed traffic up to the junction with via Libertà.[5]
Travelling along via Libertà, the tramway initially crossed the railway tracks for Lecco at grade; only in 1894 was the underpass opened.[6] The line then continued in mixed traffic along the provincial road Monza–Trezzo towards Concorezzo, whose built-up area was bypassed to the north along via Dante Alighieri. The Concorezzo passing loop was equipped with a water supply for steam locomotives.[10]
Shortly after Concorezzo, the tramway's route was joined by that of the interurban from Milan and Cascina Gobba, operated over time by various companies, such as TIP and STEL. Before the latter line was electrified (in the 1920s), the two tramways ran alongside each other at the junction between via Alighieri and via Libertà; later, with the relocation of the second route outside the town centre, they joined near the innesto di via Volta.[10]
The two tramways then continued side by side, on a reserved track to the right of the provincial road, reaching the centre of Vimercate, at Piazza Marconi, where each had its own passing loop. At the entrance to the square was the only connection between the two interurbans: established in 1903, thanks to an agreement between TIP and MTB, according to Cornolò it was never used for passenger services, but only for the exchange of rolling stock and for carrying out cumulative freight transport.[10]

Leaving Piazza Marconi, the tramway entered via Galbussera and then resumed its route on a reserved track along the provincial road to Trezzo, passing successively through the towns of Bellusco and Busnago.[10]
At Trezzo, the passing loop was equipped with a water supply, stub tracks for rolling stock storage, and a locomotive shed. The tramway crossed the Adda, staying in the centre of the metal girder bridge built in the 1880s, arriving at Capriate. From the passing loop serving this town, a branch line led directly to Crespi d'Adda near the factory. Initially, the branch was used for both freight and passenger services, but from 1908 the latter was suspended.[10][11]

From Capriate, the tramway continued straight to Brembate di Sotto on a mixed-traffic route to the right of via Vittorio Veneto. At Brembate, the line returned to the left and crossed the town centre through narrow and winding streets, which made it necessary to limit the speed of convoys. In this built-up area, the line crossed the Brembo via a bridge, also of limited width.[10]
At the locality of Boltiere, the line joined the provincial road Milan–Bergamo (later SS 525 del Brembo) in the direction of the Bergamo capital, running along it in mixed traffic on the left side. In succession, the tramway passed Osio Sotto, Osio Sopra, Dalmine, Sforzatica, Lallio and Grumello. At Dalmine, in 1947, a branch line was built along via Locatelli to establish a local service for the factory workers of the nearby Dalmine plant.[10][11]
After Grumello, the tramway route entered the territory of the municipality of Bergamo. It ran along via Moroni and, on a reserved track, along the route of via dei Caniana (not yet existing at the time), then passing under the railway lines for Seregno and Lecco. Upon reaching via San Giorgio, it entered via Paleocapa, where the terminal passing loop was located. The rolling stock depot in Bergamo was situated near via dei Caniana.[5][12]
Rolling stock

Among the locomotives used was the former no. 1 – Como of the Ferrovie Nord Milano, a three-axle locomotive of 1880 built by Maschinenfabrik Esslingen, which had been renamed Massa Marittima in 1904 following its purchase by FMF, the concessionaire of the Massa Marittima–Follonica railway.[13][14]
The strong asymmetry of the line's traffic volumes – heavy during peak hours and light off-peak – made steam traction uneconomical. In 1932, in addition to a three-axle Breda locomotive acquired from the Bergamo–Trescore–Sarnico Tramway,[15] accumulator railcars were purchased, which combined the operational flexibility of electric trams with the advantage of being able to maintain the existing infrastructure, avoiding the construction of overhead power supply systems. The first three models were produced by Carminati & Toselli with electrical equipment from TIBB.[16][17]
Two years later, the closure of the Mantua–Asola tramway and Mantua–Viadana Tramway, which operated with the same system, allowed MTB to purchase four more accumulator railcars built by Rognini & Balbo, which were nicknamed le Mantovane (the Mantuan ones) by the staff.[16][18] The new vehicles were assigned to off-peak services, while steam locomotives remained for hauling the busiest trains of the day, as well as for freight service.[1]
The steam locomotive no. 34, purchased from the Milan–Gallarate tramway, is preserved at the National Museum of Science and Technology in Milan.[19]
In December 1948, the rolling stock fleet consisted of ten steam locomotives,[20] seven accumulator electric railcars, forty-five passenger cars (four of which were bogie cars), forty-five open freight wagons, twenty-five closed freight wagons, two flatcars with trailers, and one crane.[8]
Summary of motive power
| Unit | Year of construction | Builder | Type | Notes |
|---|---|---|---|---|
| 1÷4 | 1889–1890 | Krauss | 2-axle | |
| 5 | 1891 | Henschel | 2-axle | |
| 6 | 1893 | Henschel | 2-axle | |
| 7÷8 | 1895 | Breda | 2-axle | |
| 9÷12 | 1909–1910 | Krauss | 3-axle | |
| 6 (II) | 1892 | Henschel | 2-axle | ex TIP |
| 2 (II) | 1913 | Breda | 3-axle | ex Bergamo–Trescore–Sarnico tramway |
| 2 (III) | Greco | 3-axle | rebuilt | |
| 14 | 1908 | Krauss | 3-axle | ex Bologna–Casalecchio–Vignola tramway |
| 22 | 1903 | Greco | 3-axle | ex SFSM of Domodossola, rebuilt by Greco from a Krauss locomotive of 750 mm (2 ft 5+1⁄2 in) |
| 24÷25 | 1910 | Henschel | 3-axle | ex STV |
| 32 | 1881 | Henschel | 2-axle | ex TIP |
| 34 | 1909 | Henschel | 2-axle | ex Milan–Gallarate tramway |
| 4 (II) | 1880 | Kessler | 3-axle | ex STV, originally built for the Como–Fino–Saronno tramway |
| 21 | 1903 | Henschel | 2-axle | ex STV |
| 64 | 1908 | Tubize | 3-axle | ex MMC, originally built for TIP |
| 80 | 1911 | Tubize | 3-axle | ex MMC, originally built for TIP |
| 82 | 1909 | St. Léonard | 2-axle | ex MMC, originally built for the SFT |
| 65 | 1909 | Borsig | 3-axle | ex MMC, originally built for TIP |
| 68 | 1909 | Borsig | 3-axle | ex MMC, originally built for TIP |
| 70 | 1909 | Borsig | 3-axle | ex MMC, originally built for TIP |
| 71 | 1909 | Borsig | 3-axle | ex MMC, originally built for TIP |
| A1÷A3 | 1932 | Carminati&Toselli–TIBB | accumulator railcars | |
| A4÷A7 | 1927 | Rognini&Balbo–TIBB | accumulator railcars | ex TPM |
See also
References
- 1 2 3 Zanin 2009, p. 1579.
- ↑ Cornolò 1980, p. 138.
- 1 2 3 4 Zanin 2009, p. 51.
- 1 2 3 4 Cornolò 1980, p. 44.
- 1 2 3 Cornolò 1980, pp. 54–55.
- 1 2 Zanin 2009, p. 52.
- ↑ Cornolò 1980, pp. 186–187.
- 1 2 Cornolò 1980, p. 254.
- ↑ Cornolò 1980, p. 341.
- 1 2 3 4 5 6 7 Cornolò 1980, p. 55.
- 1 2 Zanin 2009, p. 53.
- ↑ Zanin 2009, pp. 51–53.
- ↑ Cornolò 1979, p. 56.
- ↑ Adriano Betti Carboncini, Ferrovie e industrie in Toscana, Calosci, Cortona, 2003. ISBN 88-7785-183-X, p. 218.
- ↑ Nico Molino, Le locomotive per tranvie a vapore, in Mondo ferroviario, n. 148, October 1998, p. 17.
- 1 2 Zanin 2009, p. 133.
- ↑ Cornolò 1980, pp. 138–139.
- ↑ Cornolò 1980, pp. 138–140.
- ↑ Alessandro Albé, Giampietro Dall'Olio, STIE - la tranvia Milano-Gallarate (seconda parte), in Tutto Treno, n. 30, March 1991, pp. 18–21.
- ↑ Cornolò 1980, p. 253.
Bibliography
- Cornolò, Giovanni (1980). Fuori porta in tram. Le Tranvie extraurbane milanesi 1876–1980 [Out of town by tram. The Milanese interurban tramways 1876–1980]. Parma: Ermanno Albertelli Editore.
- Cornolò, Giovanni (1979). Cento anni di storia delle Ferrovie Nord Milano [One hundred years of history of the Ferrovie Nord Milano]. Il Globo.
- Pedrazzini, Claudio (2022). Storia della tranvia Monza - Trezzo - Bergamo (15 febbraio 1890 - 28 giugno 1958) [History of the Monza–Trezzo–Bergamo tramway (15 February 1890 – 28 June 1958)]. Milano: Club Fermodellistico Bresciano/Museo dell’Industria e del Lavoro - Brescia/Treni di carta. ISBN 8831949950.
- Zanin, Paolo (2009). Monza e i suoi tram. Storia dei collegamenti tranviari da Monza a Milano e alla Brianza [Monza and its trams. History of the tram connections from Monza to Milan and Brianza] (2 ed.). Firenze: Phasar. ISBN 978-88-6358-028-0.
External links
- "Mappa" [Map]. OpenHistoricalMap.
