Lovere–Cividate Camuno Tramway

Lovere–Cividate Camuno tramway
Panorama of Lovere with the tramway
Overview
StatusClosed
LocaleLombardy, Italy
Service
TypeInterurban tram
OperatorSocietà Anonima della Guidovia Camuna
History
Opened1901
Closed1917
Technical
Line length22.8 km (14.2 mi)
Number of tracks1
Track gauge950 mm (1901–1909);
1445 mm (1909–1917)

The Lovere–Cividate Camuno tramway (also known as the Guidovia Lovere-Cividate Camuno or Guidovia Camuna) was an interurban tram line that connected Lovere on Lake Iseo to Cividate Camuno in Val Camonica.

History

Tram departing from Lovere (early 1900s)

The idea of a Camonica Valley tramway connecting Lovere to the upper Val Camonica arose during discussions about the opportunity to extend the Brescia–Iseo railway along Lake Iseo and then towards Breno and Edolo. Lovere, a commercial centre on Lake Iseo, was the site of the Gregorini steel plant and of the Lake Iseo Navigation Company, which controlled the lake port. Initially, the municipality promoted itself as the terminus of a standard-gauge tramway that would continue to Edolo and was intended to be considered an extension of the Brescia–Iseo line, thanks to a lake connection between Lovere and Iseo.[1]

The preference of the provincial deputation of Brescia for a railway solution[2][3] prompted the municipality of Lovere to promote a tramway that would be a continuation of the planned Albano–Lovere railway and could extend as far as the upper Val Camonica.[4]

Despite the commitment of the provincial deputation of Bergamo to the Ministry of Public Works, the project did not proceed.[5]

In 1889, a promoting committee was formed in Lovere with the aim of requesting a concession for a tramway that would use the Tonale national road and would be a solution to the valley's transport problems. The project envisaged building a tramway from Lovere to Breno and later extending it to Edolo.[6]

At the beginning of the 1890s, the proposal entered a period of stagnation due to the economic crisis. It was only in 1895 that the Società Anonima della Guidovia Camuna (GC) could be established. Its aim was to obtain a thirty-year concession for a 950 mm narrow-gauge tramway that would connect to the Gregorini plant and the port of Lovere.[7]

Ministerial authorisation was obtained on 31 December 1896,[8] followed by protests from councillors of the province of Brescia and from Giuseppe Zanardelli, who feared losing ministerial support for the Iseo–Pisogne–Edolo railway project.[9] The company, having obtained subsidies and funding, proceeded with track laying between 1900 and 1901.[10]

The tramway route along the Lovere lakeside between the port and the station.

The first section, from Lovere to Boario, was inaugurated on 7 August 1901. The remaining section from Boario to Cividate Camuno opened on 20 October of the same year.[10]

Operations were carried out regularly by the company. The opening of the Iseo–Edolo railway in 1907, although declared by the Superior Council of Public Works as not competing with the tramway, caused the first economic difficulties for the line. Between 1908 and 1909, the gauge was converted to standard gauge.[11]

Tram service ended by Royal Decree in August 1917, during World War I. In the following months, the track was dismantled by the Military Engineering Corps for war needs, with a commitment to relaying it after the conflict. A note from the Technical Office of the Province of Brescia in 1919 confirms that the line was not reinstated.[12]

Characteristics

The tramway was a single-track line. Initially, the gauge used was the 950 mm narrow gauge, later changed to the Italian standard tramway gauge of 1445 mm, a conversion carried out between 1908 and 1909. The rails were of the Vignoles type weighing 22 kg/m. The line was also equipped with a telegraph service.[13]

Route

The tramway departed from Lovere near the town's port, while the station was housed in the building along Corso Marconi that corners with Via XX Settembre. It joined the Tonale national road, which the line followed in mixed traffic, all the way to Cividate Camuno. Apart from the termini, the line had only one station, at the Corna frazione of Darfo Boario Terme, and one compulsory stop at Rogno. All other stops were optional stops along the line.[14]

On 10 June 1908, after the arrival of the Trescore–Lovere tramway at the Bersaglio locality in the municipality of Costa Volpino, the Lovere Bersaglio stop was activated.[15] In 1910, another stop was established at the Cividate-Malegno railway station on the Iseo–Edolo railway.[16]

Rolling stock

Orenstein & Koppel locomotive of the Guidovia Camuna

Four steam tram locomotives, of the cabbed type, built by Orenstein & Koppel (construction numbers 944 and 797–799) between 1901 and 1902, were used on the line and registered as 3–6. Equipped with two driving axles (B wheel arrangement) and 4.3 metres long, they were permitted a maximum speed of 25 km/h. Locomotive No. 6, with the lowest construction number, differed from the other units due to its larger boiler and cylinder group.[17]

See also

References

  1. ↑ Pennacchio 2006, p. 60.
  2. ↑ Minutes of the Provincial Council of Brescia, 23 April 1884, pp. 77–91
  3. ↑ Pennacchio 2006, pp. 67–70.
  4. ↑ Pennacchio 2006, pp. 86–87.
  5. ↑ Mafrici 1997, p. 102.
  6. ↑ Mafrici 1997, pp. 102–103.
  7. ↑ Mafrici 1997, pp. 103–104.
  8. ↑ Mafrici 1997, p. 105.
  9. ↑ Pennacchio 2006, pp. 107–112.
  10. 1 2 Mafrici 1997, p. 107.
  11. ↑ Mafrici 1997, pp. 107–108.
  12. ↑ Pennacchio 2006, p. 190.
  13. ↑ Mafrici 1997, pp. 103–108.
  14. ↑ "Quadro orario 642. Lovere-Cividate" [Table 642. Lovere-Cividate]. Orario Generale Ferrovie - Tramvie - Navigazione - Servizi automobilistici e postali [General Timetable of Railways, Tramways, Navigation, Motor and Postal Services]. November 1913. p. 273.
  15. ↑ "Quadro orario 366. Lovere-Cividate" [Table 366. Lovere-Cividate]. Orario ufficiale delle strade ferrate, delle tramvie, della navigazione e delle messaggerie postali del Regno d'Italia con la indicazione delle principali corrispondenze estere [Official Timetable of Railways, Tramways, Navigation and Postal Messengers of the Kingdom of Italy with indication of the main foreign connections]. July 1908. p. 170.
  16. ↑ "Quadro orario 366. Lovere-Cividate" [Table 366. Lovere-Cividate]. Orario ufficiale delle strade ferrate, delle tramvie, della navigazione e delle messaggerie postali del Regno d'Italia con la indicazione delle principali corrispondenze estere [Official Timetable of Railways, Tramways, Navigation and Postal Messengers of the Kingdom of Italy with indication of the main foreign connections]. July 1910. p. 186.
  17. ↑ Hefti 1984, p. 227.

Bibliography

  • Pennacchio, Mauro (2006). La meccanica viabilità - La ferrovia nella storia del lago d'Iseo e della Vallecamonica [Mechanical Transport – The railway in the history of Lake Iseo and Vallecamonica]. Marone: Fdp Editore. ISBN 88-902714-0-X.
  • Mafrici, Claudio (November 1997). "I binari promiscui - Nascita e sviluppo del sistema tramviario extraurbano in provincia di Brescia (1875-1930)" [The mixed tracks – Birth and development of the interurban tramway system in the province of Brescia (1875–1930)]. Quaderni di sintesi. 51.
  • Hefti, Walter (1984). Dampf-Strassenbahnen [Steam Tramways]. Basel: Birkhäuser Verlag. ISBN 978-3-7643-1536-8.